background image

 

 

 

If the unit is damaged and requires service, unplug the unit from the main AC power supply and 

from the PoE supply and refer to qualified service personnel. Damage may include, but is not 

limited to: 

  The power supply cord or plug is damaged. 

  Liquid has spilled in or on the unit. 

  An object has fallen on the unit. 

  The unit has been dropped and the housing is damaged. 

  The unit displays a marked change in performance. 

  The unit does not operate in the expected manner when the user correctly follows the proper 

operating procedures. 

 

Ensure a service technician uses replacement parts specified by the manufacturer, or that have 

the same characteristics as the original parts. Unauthorized parts may cause fire, electrical 

shock, or other hazards. Dahua is not liable for any damage or harm caused by unauthorized 

modifications or repairs. 

 

Perform safety checks after completion of service or repairs to the unit.  

 

Use attachments and accessories only specified by the manufacturer. Any change or 

modification of the equipment, not expressly approved by Dahua, could void the warranty.  

 

Incorporate a readily accessible disconnect device in the building installation wiring for quick 

power disconnect to the camera. 

 

Dahua assumes no liability or responsibility for any fire or electrical shock caused by improper 

handling or installation.  

Environmental Precautions 

 

Do not aim the unit at a strong light source or into direct sunlight to focus. A strong light source 

may cause overexposure and may affect the longevity of the CCD or the CMOS sensor. 

 

Transport, use, and store the unit within the specified temperature and humidity range.  

 

Do not place the unit in a wet, dusty, extremely hot or an extremely cold environment; and avoid 

environments with strong electromagnetic radiation or unstable lighting.  

 

Never push objects of any kind into this unit through openings as they may touch dangerous 

voltage points or cause a short circuit that may result in fire or electrical shock. Take care to not 

spill any liquid on the unit.  

 

Do not use units intended for indoor applications near water, in damp or wet environments, or in 

any area classified as a wet location. Do not expose an indoor unit to rain or moisture to reduce 

the risk of fire or electric shock. 

 

Do not block or cover any openings in the unit enclosure. These openings are provided for 

ventilation to prevent overheating and to ensure reliable operation. Ensure the unit is placed in 

an area with adequate ventilation.  

 

Do not place the unit near a heat source such as heaters, stoves, radiators or other equipment 

that produces heat. 

 

Pack the unit with standard factory packaging or material of the same quality when transporting 

the unit.  

 

Take care to avoid heavy stress, violent vibration, or water spills to the camera unit during 

transportation, storage, and installation. 

Summary of Contents for 49925TNI






















Reviews: