11
4.1 Preparing the Camera
The Network PTZ camera comes with the PFB305W Wall Mount, the installer must supply the
following hardware:
•
Four (4) bolts, washers or other fastening hardware to secure the wall mount to the installation
medium. The hardware must be capable of supporting eight (8) times the weight of the camera
and mount.
•
Appropriate tools to mount the camera to the wall.
Unpacking the Camera
1. Remove the camera, the mount accessories and any hardware packages from the boxes.
2. Remove the camera from the plastic wrapping and place the camera dome-end up in the foam
packaging.
4.2 Insert a Micro SD Card
1. Remove the rear panel from the back of the camera.
2. Insert the Micro SD card into the appropriate slot on the camera module.
3. Replace the rear panel.
Figure 4-2
