Dahua Technology VTH2421F Series User Manual Download

Page: 92 / 127

●

Reset PWD

is turned off, you cannot reset the password.

3.8 Unlock Function

When the VTH is being called, during monitoring, talking and speaking, tap unlock button, and the
VTO will be unlocked remotely.

3.9 Arm and Disarm Function

3.9.1 Arm

Background Information

In case of triggering alarm after arm, produce linkage alarm and upload alarm info.

●

Please ensure that the area has been added into arm mode. Otherwise, there will be no alarm

triggering after arm.

●

Please ensure that it is in disarmed status. Otherwise, arm will fail.

Procedure

Step 1

Tap

on the home screen to select an arm mode.

There are two kinds of arm mode depending on the model you are using.

●

Home

: An arming mode that allows you to arm the system when inside the area of the

alarm system.

●

Away

: Arm the system when you leave the area of the alarm system.

●

Sleep

: An alarming mode that allows you to arm the system in the sleep time.

●

Custom

: Arm the system based on your customized needs.

Summary of Contents for VTH2421F Series
































































































































Search results

Summary of Contents for VTH2421F Series

Reviews:

Related manuals for VTH2421F Series

Brands by name

Popular brands

Dahua Technology VTH2421F Series, User Manual

Search results

Summary of Contents for VTH2421F Series

Reviews:

Related manuals for VTH2421F Series

Brands by name

Popular brands