![background image](http://html1.mh-extra.com/html/dahua-technology/vth2421f-series/vth2421f-series_user-manual_3203373069.webp)
61
Step 3
Tap
Add
.
Step 4
Tap wireless code button of wireless device. See wireless device user’s manual for details.
After successful coding, display area info.
Step 5
Tap corresponding positions to set alarm status, enter delay and exit delay.
Tap
Edit
to select a zone and
Delete
to delete the selected area.
3.6.3.3 Alarm Output
Background Information
After enabling alarm output, when other devices call this VTH, the alarm output device will output
alarm information.
Procedure
Step 1
Tap
Setting
.
Step 2
Select
Alarm
>
Output
.
Figure 3-31 Output
Step 3
Tap
to enable alarm output function, and the icon becomes
.
3.6.4 Mode Setting
Set area on/off status under different modes.
Background Information
Area mode can only be set in disarm status.
Procedure
Step 1
Select
Setting
>
Mode
.
Step 2
Select from the four arm modes based on your needs.
●
Home
: An arming mode that allows you to arm the system when inside the area of the
Summary of Contents for VTH2421F Series
