Table of Contents 11
Icon
Name
Function
Network
abnormal
indicator light
Net
Network error occurs or there is no network
connection, the light becomes red to alert you.
HDD
abnormal
indicator light
HDD
HDD error occurs or HDD capacity is below
specified threshold value, the light becomes red to
alert you.
Record light
1-16
System is recording or not. It becomes on when
system is recording.
2.1.9
NVR48/48-16P Series
The Front panel is shown as follows. See Figure 2-11.
Figure 2-11
Table 2-9
Icon
Name
Function
Power button
Power button, press this button for three seconds
to boot up or shut down NVR.
Number button
0-9
Input Arabic number.
Switch channel.
Input
number
more than 10
-/--
If you want to input a number more than 10, please
click this button and then input.
Shift
In textbox, click this button to switch between
numeral, English(Small/Capitalized),donation and
etc.
Enable or disable tour.
Up/
Down
\
Activate current control, modify setup, and then
move up and down.
Increase/decrease numeral.
Assistant function such as PTZ menu.
Left/
Right
\
Shift current activated control, and then move left
and right.
When playback, click these buttons to control
playback bar.
ESC
ESC
Go to previous menu, or cancel current operation.
When playback, click it to restore real-time monitor
mode.
Enter
ENTER
Confirm current operation.
