2
Cables and Connectors
Cable type might vary with device.
Waterproof all cable joints with insulating and waterproof tape to avoid short circuit and
water damage.
Ref. Port Name
Connector Description
1
Network Port RJ-45
Connect to standard Ethernet cable.
Note: Certain devices support Power over Ethernet.
Check the specific device to determine if the device
accepts PoE and use an appropriate Ethernet cable
and network to supply power.
2
Power
Power port. Input 12 VDC power supply.
Use in accordance with device label instructions.
Summary of Contents for N42BD32
Page 17: ...6 2 5 2 Mounting to a Wall Cables through Camera Base Conduit...
Page 18: ...7 2 5 3 Adjusting the Lens Angle...
Page 23: ...12...
