User's Manual
7
6 Wireless Siren Configuration
You can view and edit general information of the siren.
6.1 Configuring the Siren
On the
Hub
interface, select the siren as needed from the accessory list, and then you can configure
the parameters of the siren.
Table 6-1 Siren parameter description
Parameter
Description
Device Configuration
●
View device name, type, SN and device model.
●
Edit device name, and then tap
Save
to save configuration.
Area
Select the area to which the siren is assigned.
Control Permissions
Select the area over which the siren has control permissions.
Sound Settings
●
Configure volume level.
●
Select from low, medium, and high.
Alarm Duration
●
Configure the duration of the alarm sound.
●
Select from 3 s to 180 s.
Alarm Demand
If enabled, the siren flashes green every three seconds, indicating
that the detector is armed now.
Signal Strength Detection
Check the current signal strength.
Speaker Test
Tap
Start Detection
to test the volume level of the alarm.
Transmit Power
●
Select from high, low, and automatic.
●
The higher the transmission power, the farther the transmission
and the higher power consuming.
Cloud Update
Update online.
6.2 Viewing Status of the Siren
On the
Hub
interface, select the siren as needed from the accessory list, and then tab
to view
the status of the siren.
Table 6-2 Status
Parameter
Description
Temperature
The temperature of the environment.