II
Important Safeguards and Warnings
Operation Requirement
Do not place or install the device in a place exposed to sunlight or near the heat source.
Keep the device away from dampness, dust or soot.
Keep the device installed horizontally on the stable place to prevent it from falling.
Do not drop or splash liquid onto the device, and make sure there is no object filled with
liquid on the Camera to prevent liquid from flowing into the device.
Install the device in a well-ventilated place, and do not block the ventilation of the Camera.
Operate the device within the rated range of power input and output.
Do not dissemble the device.
Transport, use and store the device under the allowed humidity and temperature conditions.
Electrical Safety
Improper battery use might result in fire, explosion, or inflammation.
When replacing battery, make sure the same model is used.
Use the recommended power cables in the region and conform to the rated power
specification.
Use the power adapter provided with the device; otherwise, it might result in people injury
and device damage.
The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)
standard, and supply power with rated voltage which conforms to Limited power Source
requirement according to IEC60950-1. Please note that the power supply requirement is
subject to the device label.
Connect the device (I-type structure) to the power socket with protective earthing.
The appliance coupler is a disconnection device. When using the coupler, keep the angle
for easy operation.
Maintenance Requirement
Do not try to disassemble the device yourself.
Do not touch charge-coupled device (CCD) or complementary metal oxide semiconductor
(CMOS) directly. Use a blower to remove dust or dirt from the sensor surface.
Use a soft, dry and clean cloth soaked with a small amount of neutral detergent to clean the
Camera.
Declarations
Please read the Guide carefully before installation. Keep the Guide properly for future
reference.
Pay attention to factors such as environmental requirements, application scenarios to avoid
error of system caused by external factors.
Illustrations and descriptions of devices in the Guide are for reference only, and the actual
devices shall prevail.
Devices and software subject to change without further notice.
For latest programs and additional files, please contact our customer service.
