Dahlert DT-WP-22, Instruction Manual

Page: 6 / 48

4
Water shortage
If the raw water tank is lack of water, the indicator keeps on;
If the purified water tank is lack of water, the indicator flashes, and water cannot be
discharged at this time.
Standby and wake up
The whole machine enters the standby state and screen is off if it is not operated for 3 min;
In standby state, the machine can be waked up by pressing any key.
Quantitative state
Click the Quantitative button, the quantitative button turns on, the machine enter the
quantitative water output mode, and quantitative output is 200ml;
Click the Quantitative button, the quantitative button turns off, the quantitative mode is
cancelled.
Replace the filter
With the use of the filter, the three small grids for reminding the filter life will turn off one by
one.
When the filter life expires, the three grids will flash synchronously to remind the user to
replace the filter;
After replacing the filter, hold the Filter Reset button to reset the filter life.
Button instructions