9.Software Tool
© 2023 China Daheng Group, Inc. Beijing Image Vision Technology Branch 191
12
Manually mark the defects on the image
13
Erase the original merged pixels on the image
14
Set mouse gestures as arrow
15
Change the size of merged pixels
16
Zoom in
17
Zoom out
18
Adaptive present image
19
Present image 100%
Table 9-2 Function description of the Static Defect Correction plugin
[Image] Capture an image through the catch button and display it in the white area in the middle of the
plugin. The captured image is used to analyze the location of the defect pixels /noise points.
[Defect pixel analysis] User determines the range of defect pixels to be processed by setting the threshold
and select the type of defect pixels. After clicking the "Count" button, the plugin will analyze the location of
the defect pixels /noise points in the current image, and mark the location of the defect pixels on the image
as red. The merged pixel number are display in the status bar.
If the current device supports the function of static defect pixel correction, and the merged pixel number is
less than the number 8192 that the device supports. The defect pixel information will be written into the
FLASH of the device.
[Operation] The Static Defect Correction can be performed by hardware or software. If the current device
supports Static Defect Correction and the merged pixel number is less than 8192, hardware is preferred
to perform Static Defect Correction, otherwise it can be executed through software. After the user check
the Static Defect Correction box, the image displayed on GalaxyView is the image after performing the
Static Defect Correction.
"SavetoDevice" button can save the defect pixel information to the FLASH of the device.
"SavetoFile" button can save the defect pixel information to .dp or .csv file.
[Image display area] Display the image and the location of the defect pixels /noise points.
[Status bar] Show the defect pixels number/noise points number/merged pixel number.
9.3.1.
Static Defect Correction Steps
1)
Click the "Catch" to capture an image. For details, please see section “Acquisition Images”
2)
Set threshold to determine the range of defect pixels
3)
Check "Bright dark scene" or "Actual scene" to select the type of defect pixels
