Chapter 10 Other Functions
130 BECS-A88/C88 computerized embroidery machine owner’s manual
at that time, you should do operation of “Setting frame zero point manually” again
at the last frame zero point. If the frame has been moved after power off, or if
power on again after maintenance, you should do again the operation of “Setting
frame zero point manually”.
I
f you hope the system automatically set the frame origin point, click “Auto way”,
and the system will move the frame automatically and set the zero point according
to the limit switch. So please ensure that the limit switch has been installed into
the machine and it’s effective.
10-4
Frame Restoring after Power Off
In case of frame having been moved after power off, this operation can be used to
restore the frame position before power off when the power is on again. The
proper performance of this operation is based on the “SET POWER
RESUME/ZERO POINT”. In addition, if the power is off in the process of
embroidering operation and the frame has not been shifted, you also can directly
pull the operation bar to continue embroidering after power is on again.
Click
in the main screen to enter the “Other functions” screen.
Click
“
Continue to Emb. after power-off
”.
If it is “Setting frame zero point automatically”, the machine will automatically
move to the frame zero point and then back to embroidering position before
power-off. It will be invalid if the operation of “setting frame zero point manually”
is done.
Summary of Contents for A88
Page 8: ......