Chapter 2 Operation Instruction
BECS-A88/C88 computerized embroidery machine owner’s manual
23
Move frame to let design be central——click
to enter the assistant
operation screen. Note: this function is to place the design at the centre of the
design range set by software (soft range of design). To set the soft range of design,
click
to enter the “Other Function Operations”.
Save the design’s start point
——
click
to enter the assistant operation
screen. Note: The origin point has to be set before saving the start point. To set the
origin point, click
to enter the “Other Function Operations”.
Set cyclic embroidery
——
click
to enter the parameter management
screen. Then click “Sewing Para1” and set according to prompts.
Embroidery Confirmation
The user can click
after finishing assistant operations. Choose
in the followed prompt and
(embroidery preparation) will change into
(embroidery confirmation), which means that the machine has entered the
embroidery confirmation status.
Summary of Contents for A88
Page 8: ......
