Operation
Figure 4: CCD-100 Rear Panel
POWER
The green LED located at the bottom of the rear panel
between the
GAM
switch and the
POL
switch lights when
power is supplied to the camera either through the
POWER,
GATE,
or
REMOTE
connectors. The camera requires
approximately 200mA with a voltage of +10.5VDC to
+18VDC. The external power supply, Dage P/N 738044-02,
provides the correct power to the camera.
VIDEO
The BNC video connector provides a 1Vp-p composite
video signal into a 75
Ω
termination. The output video of the
camera is also available at the
GATE
connector. If the
GATE
connector is being utilized, be sure not the double terminate
the video by also using the
VIDEO
connector.
