Representate exclusivo para Colombia:
20
21
The screen returns to the normal state.
- It is used when converting various channels of the state of the artificial stop at one go.
- Displays the condition that the Pad is not connected to the body
(6) Cautions when using the device
- As the inside of the device should be manipulated by an expert engineer, random
disassembling may cause trouble.
- During the procedure you should wear protective glasses and be very careful lest the light
shine to eyes.
- Prohibit the use of the device around volatile matter or metal substances.
- As the operation of the device may stop when the voltage of the place where it is installed
is not uniform, use it after installing A.V.R (Automatic Voltage Regulator) as occasion de
mands.
- It is safe only when you use the device after making sure to confirm the control panel be
fore using it.
- As heat may be generated during the use, it is prohibited to use the device on one area for
a long time and check the part of the procedure while using it.
- Please use the device after careful reading of the User Manual before use.
- After finishing the use of the device, keep the power cord separating it from the socket.
(7) How to store and maintain the device after use
- It is good to keep the device at room temperature (5
o
C
~
40
o
C
).
- Keep the device in a well-ventilated indoor place away from
direct light that is not damp.
- No shock should be given from the outside of the device.
- Keep the power cord separating it from the socket.
- Keep the key separately in order to prevent any unauthor
ized use by other people besides the manager.
Administration and caution
Safety Tips
1) Unplug the electrical cord from
the wall outlet when not in use
6) Do not handle or pull the power
cord with wet hands. This may re-
sult in electrical shock.
2) Do not disassemble, modify, or
attempt to fix the product. When
repair is required, please call for
service.
7)Do not plug product into electri-
cal outlets shared with other elec-
tric appliances. This may result in
fire.
3) If you hear or experience abnor-
mal sounds or functions, turn off
the power immediately and call for
service.
8) Do not use damaged power
cords, or outlet. This may result in
fire or electrical shock.
4) Do not bend or mistreat the
power cord. This may result in
electrical shock.
9) Insert a plug in a wall outlet with
ground.
5) Unplug product from electrical
outlet in the event of an electrical
storm to avoid damage, electric
shock, or fire.
10) When the
product is ex-
posed to water
or moister, un-
plug the outlets
and do not use.
Self Checking Point
1) Before using the product
(1) Does the power code Insert a plug in a wall outlet?
(2) Did you check the connection between main frame and the Pad?
(3) Did you check the connection line?
(4) Did you check the power switch ON?
(5) Do you see any problem with screen?
2) After using the product
(1) Did you check the power switch OFF?
(2) Did you check the plug off in a wall outlet?
(3) Did you clean the Pad?
All connected Channels “ON”
The handpiece is not connected
