Precaution
VMCTOPES8D51
Precaution
– 3
5. Set-up
1) Fully understand the process in operation manual.
2) Check the setting value of all gages and state of moving parts.
3) On handling heavy weight, use a crane, hoist or make a teamwork.
4) The work light will be very hot after it has been lit for a long period.
Be careful not to touch it.
5) Be careful not to operate the wrong switch.
Visually check the switches on the operation panel before operating them.
6) When load and unload workpiece, be careful that the machine stops completely.
7) Never touch any moving unit while the machine is operating. Be careful that the
machine stops completely before touching it.
8) When loosening the bolts on the fixture, be sure to loosen them gradually.
9) Clean thoroughly the chips and foreign matters on workpiece and tools before
loading.
10) Clamp the workpiece and cutting tools securely.
11) Depth of cut and cutting feed must be selected with small values.
12) Never put any tools or instruments on the machine operation panel or on any
machine part.
13) Check that set-up is finished completely.
14) If set-up is changed, check the process with single block operation to find out
any other trouble.
15) On working in new set-up state, be sure to check the set-up state once again
before the machine operation.
Ⅱ
