background image

Pr
oduct

information

4

5

Important Safeguards

13  LIGHTNING

For  added  protection  for  this  unit  during  a
lightning  storm,  or  when  it  is  left  unattended  and
unused for long periods of time, unplug it from the
wall  outlet  and  disconnect  the  antenna  or  cable
system. This will prevent damage to the unit due to
lightning and power line surges. 

14 DISC TRAY

Keep  your  fingers  well  clear  of  the  disc  as  it  is
closing. It may cause serious personal injury.

15  OVERLOADING

Do not overload wall outlets of extension cords as
this can result in a risk of fire or electric shock.

16 OBJECT AND LIQUID ENTRY

Never  push  objects  of  any  kind  into  this  unit
through  openings  as  they  may  touch  dangerous
voltage points or “short-out” parts that could result
in  a fire or electric shock. Never spill liquid of any
kind on the unit.

17 BURDEN

Do  not  place  a  heavy  object  on  or  step  on  the
product.  The  object  may  fall,  causing  serious
personal injury and serious damage to the product.

18 DISC

Do  not  use  a  cracked,  deformed  or  repaired  disc.
These  discs  are  easily  broken  and  may  cause
serious personal injury and product malfunction.

19  SERVICING

Do  not  attempt  to  service  this  unit  yourself  as
opening  or  removing  covers  may  expose  you  to
dangerous  voltage  or  other  hazards.  Refer  all
servicing to qualified service personnel.

20  DAMAGE REQUIRING SERVICE

Unplug  this  unit  from  the  wall  outlet  and  refer
servicing  to  qualified  service  personnel  under  the
following conditions.
A. When the power-supply cord or plug is 

damaged.

B. If  liquid  has  been  spilled,  or  objects  have  fallen

into the unit.

C. If the unit has been exposed to rain or water. 
D. If  the  unit  does  not  operate  normally  by

following the operating instructions. Adjust only

those controls that are covered by the operating
instructions.  Improper    adjustment  of  other
controls  may  result  in  damage  and  will  often
require extensive work by a qualified technician
to restore the unit to its normal operation.

E. If  the  unit  has  been  dropped  or  the  cabinet  has

been damaged.

F. When  the  unit  exhibits  a  distinct  change  in

performance-this indicates a need for service.  

21  REPLACEMENT PARTS

When replacement parts are required, have the 
service  technician  verify  that  the  replacements  he
uses  have  the  same  safety  characteristics  as  the
original parts. Use of replacements specified by the
unit  manufacturer  can  prevent  fire,  electric  shock,
or other hazards.

22  SAFETY CHECK 

Upon  completion  of  any  service  or  repairs  to  this
unit,  ask  the  service  technician  to  perform  safety
checks  recommended  by  the  manufacturer  to
determine  that  the  unit  is  in  safe  operating
condition.

23  WALL OR CEILING MOUNTING

The product should be mounted to a wall or ceiling
only as recommended by the manufacturer.

24  HEAT

The  product  should  be  situated  away  from  heat
sources such as radiators, heat registers, stoves, or
other  products  (including  amplifiers)  that  produce
heat.

25

To  prevent  battery  electrolyte  leakage,  which  may
result  in  injury  and  damage  to  the  unit  or  other
objects, observe the following precautions:
A.

All batteries must be installed with the proper
polarity.

B.

Do not mix new with old or used batteries.

C.

Only use batteries of the same type and brand.

D.

Remove the batteries when they are not to be
used for a long period time.

E.

When  the  batteries  have  become  discharged,
they  must  be  disposed  of  in  a  safe  manner
which complies with all applicable laws.

Advantages of This Product Are ..... 

• DVD, VCD, CD, CD-R(MP3), CD-RW, VHS 
• Watching DVD for recording broadcast 
• Integrated remote control (VCR, DVD) 
• VISS function 
• Multiplex sound playback/record  
• High Sound Quality of 6 head Hi-Fi          
• Simple record function 
• MP3 file playback function (CD-R disc

having records of MP3 files) 

• Screensaver function  (DVD)
• Coaxial digital Audio output (PCM, Dolby

Digital, dts) 

You can enjoy high-level digital audio by

connecting with amp embedded with Dolby

Digital / dts decoder. 

• Analog audio 2-channels output for

DOWNMIX (x1) 

• Composite video output (x1)
• Slow Forward playback  (DVD)
• Fast Forward / Reverse playback 
• Search of title, chapter, and time  in DVD

disc, and search of time and track time in
VCD.

• Various TV aspect (DVD)

4:3 for Pan and Scan, 4:3 for Letter Box, and 16:9

for Wide 

• Repeat playback (title, chapter, and part for

DVD/ track, disc, and part for VCD/CD) 

• Selective Play (DVD/VCD/CD)

You can select and  play the desired title / chapter

of DVD and track of Video CD/CD in STOP

mode. 

• 11 languages OSD (On Screen Display)

function (DVD)

You can select and display OSD in 11 languages.

• Parental Lock function (DVD) 

This function can prevent playback of software

that may be unsuitable for children. 

• Multi Audio function (DVD) 

The audio soundtrack can be heard in up to 8

languages. In the case of SVCD or VCD, it

depends on the disc. (The number of audio

languages depends on the software.) 

• Multi Subtitle function (DVD) 

The subtitle can be seem in up to 32 languages. In

the case of SVCD or VCD, it depends on the disc.

(The number of subtitle languages depends on

the software.)  

• Multi Angle function (DVD) 

This function allows you to choose the viewing

angle of scenes which were shot from a number of

different angles. (The number of angles depends

on the software.) 

• Screen zoom function  (DVD/VCD)

Summary of Contents for SG-7200D


































Reviews: