background image

Caution

 

 

Do not touch or hold food with wet hands

                (food container) in the freezer compartment

      

  

ó

There is a risk of chilblains (cold burns).

 

 

Do not store medicine, academic research  

 

   

    samples etc. in the refrigerator.

 

Do not store vegetables in the chilled room, for  

 

  they can be frozen.

Food Storage Tips

 

Wash food before storing.

  Divide and separate food into
  smaller pieces.

  Place watery food or food
  with a lot of moisture in front
  shelves (close to door side).
  If they are placed close to the
  cold air spout, they can be
  frozen.

  Warm or hot food should be
  cooled down enough before
  storing to reduce power
  consumption and to enhance
  refrigeration performance.
  

  Be careful in storing tropical fruits 
  such as bananas, pineapples and 
  tomatoes, as they can easily 
  deteriorate in lower temperatures.

 
  Keep enough space between
  the foods. If too tight or too close, 
  cold air circulation is hindered, resulting
  in poor refrigeration.

  
  Never forget to cover or wrap
  food to prevent odours. 

How to use the Dispenser

Hold an appropriate container under the ice and water 
dispenser.
Keep ‘WATER’, ‘ICE CUBE’, or ‘CRUSHED ICE’ button 
pressed until the desired amount of water/ice is in the 
container.

Caution

 

Avoid using thin fragile cups or crystal glasses when 

    taking ice cubes.

 

For your safety, never insert your fingers or other tools 

    into the dispenser outlet.

 

If you find the ices discolored, stop using the dispenser 

    and call the service agent.

How to use the Automatic 

Icemaker

 

About 8 ice cubes (14~16 times a day) are made at one 

    time. If the ice storage case is full, ice making stops.

 

It is normal for the icemaker to make banging sounds 

    when the ice cubes are falling into the ice storage case.

 

To prevent bad odour or smell, regularly clean the 

    ice cube's storage case.

 

If the amount of ice in the storage case is not sufficient, 

    the ice may not be dispensed. Wait a day or so to make 
    more ice.

 

If the ice does not dispense easily, ensure the dispenser 

    outlet is not blocked.

In case the ice maker doesn’t work

If the ice cubes get stuck and not
dispensed

 

Pull out the ice storage case and separate  

    any ice cubes that may have stuck together.

 

If the amount of water which is supplied to the icemaker 

    needs adjusting, call for the service agent.

In case of power failure

 

The ice cubes in the storage case may melt to flow down  

    to the ice dispenser.

 

If many hours of power failure is predicted, pull out the 

    storage case, remove the icecubes in it and replace it 
    back when power resumes.

6

WATER

ICE CUBE / CRUSHED ICE

Summary of Contents for RFS-26A Series


















Reviews: