background image

Be sure to keep for safety!

Read these safety instructions thoroughly and carefully 
before using. Please keep this user guide on hand for 
future reference.

Indicates the possibility of danger of
death or serious injury.

Indicates the possibility of risk of personal
injury or material damage.

Other Signs

DO NOT remove or disassemble!

Be sure to unplug from outlet/mains!

NO. DO NOT...

Be sure to keep and follow!

Caution

1. If the supply cord becomes damaged, it must be replaced  
    by the manufacturer or its service agent or a similarly    
  qualified person in order to avoid a hazard.
2. This appliance is not intended for use by persons  

 

  (including children) with reduced physical, sensory or    
  mental capabilities, or lack of experience and knowledge,  
    unless they have been given supervision or instruction   
  concerning use of the appliance by a person responsible  
  for their safety.

WARNING

Never let the power cord be crushed
by the refrigerator itself or other (heavy)
objects.
Never bend power cord excessively.

 

If the cord is damaged or peeled, it can be a

    cause of fire and electric shock.

Do not plug several appliances into the
same wall outlet.

 

It can be a cause of overheating and/or fire.

    Use an exclusive grounding receptacle for
    the refrigerator.

Never hold the power cord or plug with wet
hands.

 

There is a risk of electric shock.

Never use a damaged power cord or plug,
or loose main socket.

 

There is a risk of fire, electric shock or

    serious injury.

Be sure to ground. Check if your wall outlet
is grounded (earthed).

 

There is a risk of electric shock hazards.

Never unplug by pulling only the power cord
wire. Always grip the plug firmly.

Let the cord from the plug outlet be
directed downwards.

 

If it is directed up, the cord near the plug is

    bent and can be damaged, which can
    cause an electric shock or fire.

Do not install the refrigerator on a wet
floor or in a place with excessive humidity and
moisture.

 

Electric insulation gets weakened,

    resulting in a risk of electric shock
    hazards.

Never let the power cord touch or pass over
heating appliances.

 

Power cord can be damaged, resulting in a

    risk of electric shock hazards.

Check if plug is loose from the wall outlet.

 

Electric insulation gets weakened,

    resulting in a risk of electric shock
    hazards.

Never pour or spray water into the
refrigerator (both interior and exterior).

 

Electric insulation gets weakened, resulting

    in a risk of electric shock hazards.

Do not place containers with water or
liquid on top of refrigerator.

 

Water can spill into the refrigerator

    and can cause electric shock hazards or
    damage.

Do not let children hang on the refrigerator
doors.

 

Refrigerator can fall and harm them.

1

Summary of Contents for RFS-26A Series


















Reviews: