background image

Do not move or remove compartment
shelves/pockets while foods and
containers are on them.

 

Hard containers (of glass, metal etc.) can

    fall to hurt you and can break glass shelf
    and interior parts.

Never repair, disassemble or amend the
refrigerator on your own.

 

There is a risk of personal injury or damage

    to the refrigerator. It is recommended that
    any service be carried out by a qualified
    person.

Never store any flammable gas or liquid
in the refrigerator.

Never use flammable gas, benzene, thinners,
gasoline, spray etc. near the refrigerator.

 

There is a risk of fire, explosion and

    personal injury or damage.

If a gas leak is found near the refrigerator
or in the kitchen, ventilate it immediately
without touching the power plug or
refrigerator.

Do not store medicine, academic research
samples which require strict temperature
control in the refrigerator.

Never insert fingers or hands into the bottom
of the refrigerator, especially into the bottom
back.

 

You can be hurt by sharp metal edges or can

    receive an electric shock.

Do not change fuse or LED lamp on your own.
Call the service agent to change them.

When you find the power cord damaged or
cut, call the service agent immediately.

When you get rid of your old refrigerator, be
sure to remove the door packings first.

 

Children can be entrapped and suffocated in

    an abandoned refrigerator.

               

CAUTION

Be sure to unplug the refrigerator when it is
not going to be used for a long time.

Never touch foods and containers
especially of metal with wet hands in the
freezer compartment.

 

You can be hurt by chilblains or cold burns.

Never eat any decayed or deteriorated food at all.

 

Foods stored too long in the refrigerator can  

    deteriorate and become decayed.

Never place bottles and containers of glass
in the freezer compartment.

 

Glass containers and bottles can break

    and hurt you.

When moving the refrigerator (horizontally
or tilted), more than 2 persons are required
to hold it.
(One to hold top back handles, the other to hold 
the bottom holder. )
If other parts are held instead, it is very 
dangerous and likely to slip.

Be sure to turn up the wheel first before
moving the refrigerator.

 

The wheels can damage or scratch the floor.

    If you are moving it for a long distance, never 
    forget to fasten the interior parts tightly with tapes.

 

Otherwise, the parts can collide and

    break each other.

Installation Guide

 Read these safety instructions carefully before use and 

follow precautions for your safety.

Precautions in installation and 

power connection

¥

To prevent fire, electric shock or leakage

Never install the refrigerator on a wet, watery floor or   

    where water can gather easily.

Check the following before power connection.

  

Connect power plug only to a grounded wall socket           

       (an earthed mains).

  

Do not plug refrigerator power together with other  

 

      appliances to the same socket.

Do not use an adapter plug or an extension cord.

2

Summary of Contents for RFS-26A Series


















Reviews: