Daewoo LV32L1B1LM, Instruction Manual

Page: 40 / 48

39
Adjustment of Time
- You must previously adjust current time in order to reserve Automatic On/Off.
Adjustment of Time
2. Set up On Time.
• Press the "MENU" button and select "TIME".
• Move to On Time using “
▼
/
▲
” button, and then set up
Activate, Hour, Minute, Volume, Mode using “
◀
/
▶
”
button.
Activate : select repeat time.
Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun, Sun.
Hour : 0~23 hours.
Minute : 0~59 minute.
Volume : set volume level when TV turns on automatically.
Mode : set TV(Analog or Digital) mode when TV turns on
automatically.
4. Set up Auto Stand-by
• Press the "MENU" button and select "TIME".
• Select Auto Stand-by On/Off by pressing “
◀
/
▶
”
button.
Note.
• Auto Stand-by is set-up, if any signal does not loaded to
TV during 5 minutes, TV will be automatically turn off.
Note.
• When TV is received digital broadcasting signal, Clock is set up automatically.
1. Set up Off Time.
• Press the "MENU" button and select "TIME".
• Move to Off Time using “
▼
/
▲
” button, and then set
up Repeat, Hour, Minute using “
◀
/
▶
” button.
Repeat : select repeat cycle.
Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun, Sun.
Hour : 0~23 hours.
Minute : 0~59 minute.
TIME
EXIT OK MENU
Clock
Off Time
On Time
Sleep Timer
Auto Standby
Time Zone
24/May 14:07
Off
Off
10min
On
Western Australia GMT+8
Repeat ◀ Off ▶
Hour ◀ 0 ▶
Minute ◀ 00 ▶
Close
TIME
EXIT OK MENU
Clock
Off Time
On Time
Sleep Timer
Auto Standby
Time Zone
24/May 14:07
Off
Off
10min
On
Western Australia GMT+8
Activate ◀ Off ▶
Hour ◀ 0 ▶
Minute ◀ 00 ▶
Volume
◀
30
▶
Mode ◀ DTV ▶
Close
TIME
EXIT OK MENU
Clock
Off Time
On Time
Sleep Timer
Auto Standby
Time Zone
24/May 17:07
Off
Off
10min
On
Western Australia GMT+8
TIME
EXIT OK MENU
Clock
Off Time
On Time
Sleep Timer
Auto Standby
Time Zone
24/May 17:07
Off
Off
10min
On
Western Australia GMT+8
3. Set up Sleep Timer.
• Press the "MENU" button and select "TIME".
• Move to Sleep Timer using “
▼
/
▲
” button, then set up
sleep timer using “
◀
/
▶
” button.
Whenever pressing “
◀
/
▶
” button. Time changes as
followings.
Off -> 10 -> 20 -> 30 -> 60 -> 90 -> 120 -> 180 ->
240
Note.
• You can set up sleep timer easily using SLEEP button on
the remote controller.