Daewoo KOT-150S0A, Service Manual

Page: 26 / 72

25
16. REPLACING THE POWER CORD
1. Remove the microwave oven from its mounting location.
2. Remove the vent grille, the wire protector and the cabinet from the microwave oven (See “Cabinet Removal).
Refer to FIG. 16 and the inset for the following steps:
3. Unplug the black and white power cord leads.
4. Remove the ground screw from the green power cord lead.
5. Remove the old power cord.
6. Raise the cover just enough to slide the new power cord strain relief block into the chassis slot.
7. Connect the power cord lead to the wiring harness connector so the sections lock together.
8. Route the green wire under the cover, and mount the eyelet to the chassis with the screw you removed earlier.
9. Refer to “Cabinet Installation” and reinstall the cabinet and the vent grille on the microwave oven.
10. Reinstall the microwave oven in its mounting location.
FIG. 16
WARNING :
Personal Injury Hazard
Disconnect from the electrical supply before servicing the unit. Failure to do so could result in electrical shock or
other personal injury.
CAUTION :
Personal Injury Heazard
Because of the weight and size of the microwave oven, two people are required to safely move and install it.
Failure to do so could result in personal injury.
NOTE :
Disconnect the black lead by pressing in on the locking arm of the connector and pulling it loose.