Daewoo KOR-122M0A Service Manual Download Page 12 | Manualshive

Page: 12 / 58

background image

11

For best results, some recipes call for one power level for a certain length of time and another power level
for a different length of time.
Your microwave oven can be set to change from one to another.

1. Touch number pads for the

desired cooking time in the first
stage.

2. Touch Power pad.

3. Touch the number pad for desired power level in the

second stage.

4. Touch the number pads for desired cooking time in

the second stage.

5. Touch START pad.

When you touch START pad, both STAGE1 & 2 indicator lights come on, STAGE1 indicator light
starts blinking to show you that the oven is cooking in the first of two cook stages.
The oven will cook at the power you selected for stage one. At the end of stage one, the oven will
beep and start stage two, the STAGE1 indicator goes off and the STAGE2 indicator starts blinking.
The display counts down the time remaining in stage two when stage two ends, you will hear 3 beeps.

All recipes required frozen foods to be defrosted fully before cooking.
This oven can be programmed to automatically defrost foods before cooking.

1. Touch Auto Defrost pad.

2. Touch number pads for the defrosting weight you

want.

3. Touch Power pad.

4. Touch Power pad once more.

5. Touch number pads for desired cooking time in the

first stage.

The STAGE1 indicator lights and the display
will show the numbers you pressed in the
order you touched.
This example shows 5 minutes 30 seconds at
full power.

The STAGE2 indicator lights and "P–" is
displayed.

The display will show what you touched.

The display will show the numbers you
pressed in the order you touched.

COOKING IN TWO STAGES

WEIGHT DEFROSTING AND COOKING IN TWO STAGE

5

3 0

The WEIGHT DEFROST indicator lights and
"0" is displayed. And the lb indicator starts
blinking.

The display will show the numbers you
pressed in the order you touched.

The STAGE1 indicator lights and "P–" is
displayed.

"P-HI" will appear in the display window.
This example shows full power (100%).

The display will show the number you
pressed in the order you touched. This
example shows 5 minutes 30 seconds at full
power.

Auto

Defrost

Power

Power

«
...
10
11
12
13
14
...
»

Summary of Contents for KOR-122M0A



























































Reviews:

No comments

Related manuals for KOR-122M0A

Brand: NEFF Pages: 24

Brand: Panasonic Pages: 9

Brand: NEFF Pages: 156

Brand: Omega Pages: 25

Brand: Teka Pages: 124

Brand: AEG Electrolux Pages: 44

Spacemaker JNM1541DN

Brand: GE Pages: 3

Brand: Rangemaster Pages: 31

Brand: EURO Pages: 24

Brand: NEFF Pages: 80

Da Vinci LLKDV13

Brand: LLK Pages: 29

Brand: Garland Pages: 16

Brand: NEFF Pages: 3

Brand: Fagor Pages: 140

Brand: Omcan Pages: 28

Brand: Omega Pages: 29

Brand: Electrolux Pages: 16

Brand: Electrolux Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands