17
10. To remove wind guide assembly.
1) Remove a screw which secure the wind guide assembly.
2) Draw forward the wind guide assembly.
3) Pull the fan from the motor shaft.
4) Remove two screws which secure the motor shaded pole.
5) Remove the motor shaded pole.
6) Reverse the above steps for reasembly.
11. To remove H.V.transformer.
1) Remove four screws holding the H.V.transformer.
2) Remove the H.V.transformer.
3) Reverse the above steps for reassembly.
Summary of Contents for KOD-135P9A
Page 27: ...27 WIRING DIAGRAM...
Page 29: ...29 Measure Point MP2 MP1...
Page 31: ...31 2 PCB CIRCUIT DIAGRAM...
Page 35: ...35 4 PIZZA OVEN ASSEMBLY C00...
