The battery is working for the carburetor valve at “RUN” channel. So please make sure the switch is
at the “OFF” channel when the unit is turn off.
2) Fuel valve
The fuel valve is used to control the fuel flow from the tank to the carburetor. After stopping the
engine, the fuel valve should turn to “Off” position.
3) Choke button
The choke button is used to provide mixed gas with rich fuel to the engine when it is in cold start.
When the engine runs normally, push it to “open” position.
4) AC circuit breaker
The overload current will make the circuit breaker trip out automatically. It is required to prevent the
generator set from short circuit or overload. If the circuit breaker drips out, do not turn on the circuit
breaker before checking the load and short circuit.
On
Choke
Fuel valve
On
Off
3 phase
Circuit
breaker
1 phase
Circuit
breaker
Off
5
