10
9
This refrigerator has been built with the door hinges on the right.
If you wish to change the opening direction, follow the instruction below:
•
Unplug the refrigerator from its electrical outlet.
•
Empty everything in the refrigerator including shelves, food, etc.
1. Remove the hinge cover on the right top
of the cabinet.
2. Remove the two screws (using a ratchet
tool with a 8MM socket) that hold the top
hinge to the cabinet. Keep these screws
for later use.
3. Lift the top hinge straight up to free the pin
from the socket on the top of the door.
4. Lift the door and place it on a padded
surface to prevent scratching it.
5. Remove the plug buttons from the upper
left holes as illustrated and transfer them
to the uncovered holes at the right side.
Be sure to press the plug buttons firmly
into the holes.
6. Lay the cabinet on its side down on the
floor. Remove the two screws that hold
the bottom hinge to the cabinet using a
10MM socket. Keep these screws and
washer for later use.
Top hinge
Hinge cover
Plug button
Bottom hinge
7. Insert the bottom hinge at the left side
using the two screws previously removed
in step 6.
NOTE:
Do not tighten screws.
8. Stand the cabinet.
9. Replace the door making sure the bottom
socket enters the bottom hinge pin.
Be sure washer is in place.
10. While holding the door in the closed
position, secure the top hinge at the left
side using the two screws previously
removed at the beginning in step 2.
Do not tighten the screws until the top of
the door is leveled with the top cabinet.
11. Replace the hinge cover.
12. Tools required:
-8MM & 10MM socket-ratchet.
-Putty knife or thin-blade screwdriver.
CHANGING THE REVERSIBLE DOOR
Refrigerant Information
R600a
1300
0.032kg
Refrigerant
Charge
Global Warming Potential
Contains fluorinated greenhouse gases covered by the Kyoto Protocol and is hermetically sealed.
Foam blown with fluorinated greenhouse gases.
