Daewoo Espero Owner'S Manual Download Page 71

Page: 71 / 114

CARAVAN OR TRAILER TOWING

Your vehicle

is designed

primarily

as a

passenger

vehicle

therefore

handling,

braking, durability and economy will be af-

fected by towing a caravan or trailer.

Your safety and satisfaction depend upon

proper use of the correct equipment. Also,

you should avoid overloading

and other

abusive use.

The maximum loaded trailer weight you can

pull with your vehicle depends on your in-

tended use and what special equipment has

been installed on it. Before attempting

any

towing, ensure that the correct equipment
is fitted to your vehicle.

Your Daewoo Outlet will help supply and

install

towing

equipment

to suit your

requirements.

VehiciefTrailer Loading

To load your vehicle and trailer properly,

you must know how to measure

gross

trailer weight and trailer tongue weight.

Gross trailer weight is the weight of the

trailer plus all cargo in it. You can mea-

sure gross trailer weight

by putting the

fully loaded trailer on a vehicle scale.

Trailer tongue

weight

is the downward

force exerted on the hitch by the trailer

coupler, with the trailer fully loaded and

the coupler at its normal towing height.

This weight

can be measured

using a

bathroom scale.

The weight of your loaded trailer (gross

trailer weight)

should

never exceed the

values in the chart below.

The permissible

caravan/trailer

loads are

valid for gradients up to max. 12%.

(unit: kg)

Maximum Towable Weight

With Brake Type

1100

Without Brake Type

500

7-6

NOTE

The total gross vehicle weight with

trailer

must not exceed

the Gross

Vehicle Weight Rating (GVWR) of the

vehicle. The total gross vehicle weight

is the weight of the vehicle, driver, pas-
sengers, luggage or cargo, plus the

weight

of the hitch and the trailer

tongue weight.

CAUTION

help avoid personal injury due to

swaying

caused by such things

crosswinds,

large trucks passing

road roughness, or due to separation
of the trailer, keep the trailer tongue

load at

percent of the loaded trailer

weight. Tongue load can be adjusted

by proper distribution of the load in the
trailer.

This

can

be checked

weighing separately the loaded trailer

and then the tongue load.

Summary of Contents for Espero



















































































































Search results

Summary of Contents for Espero

Reviews:

Related manuals for Espero

Brands by name

Popular brands

Daewoo Espero, Owner'S Manual

Search results

Summary of Contents for Espero

Reviews:

Related manuals for Espero

Brands by name

Popular brands