Daewoo ERF-36.A..EU, Service Manual

Page: 45 / 56

2
TEMPERATURE
ADJUSTMENT
&
CONTROL
1) TEMP. CONTROL BUTTON
•
TEMP. CONTROL : When TEMP CONTROL button is pressed, t he led lamps
LOW, MID, HIGH, VAC, SUPER COOL, LOW will be on in sequence.
TEMP. will be set if the button doesn’t get pressed again for 5 seconds.
k
FORCED DEFROST : will be start when this button pushed for over 5 seconds
continuously.
l
SHORT CIRCUIT OPERATION : will be started and stopped when this button
pushed over 30 times.
2) TEMPERATURE CONTROL
•
COMP will be controlled by the on/off condition of each mode.
k
STEP DIFF of ROOM R : 1.5 deg
l
OFF point of ROOM R : 0°C
m
ON/OFF DIFF of ROOM R :
DEFAULT MODE
: 4 deg
ENERGY CONSUMPTION MODE : 5
deg
TEMP
MODE
ON -
OFF -
1 1
3
4
STEP DIFF
ON/OFF DIFF
(5.0 deg)
5.0- 5.0-
0.0- 0.0-
8.0- 8.0-
3.0- 3.0-
2.0- 2.0-
-3.0- -3.0-
1.5- 1.5-
-1.5- -1.5-
3.5- 3.5-
6.5- 6.5-
2
5
STEP DIFF
STEP DIFF
STEP DIFF
(1.5deg) (1.5deg) (1.5deg) (1.5deg)
3) FORCED DEFROST
•
Defrost mode will be Started independent of the cycle.
k
The flow is same as the general defrost mode flow.
4) SHORT CIRCUIT OPERATION
•
COMP & FAN will be on independent of the operation condition.
k
The time limit of SHORT CIRCUIT OPERATION : 60 hrs
3
VACATION
MODE 1
Press TEMP. CONTROL button and make 1LED lamp on.(Case:
DEFAULT MODE &
ENERGY CONSUMPTION MODE)
ON POINT : 8.0°C
OFF POINT : 3.0°C
45 Daewoo Electronics