Daewoo DWF-5510P Instruction Manual Download Page 8

8

HOSE TO OPERATE

PREPARATION FOR WASHING

To obtain the best washing results, you must operate your washer properly.
This section give you this important information.

• Close zippers, snaps, and hooks to avoid

snagging other items.

Remove pins, buckles, and other hard
objects to avoid scratching the washer
interior.

• Empty pockets and turn them inside out.

• Turn down cuffs and turn synthetic knits

out to avoid pilling.

• Tie strings and sashes so they will not

tangle.

• Treat spoats and stains.

(see “Special Guides for Removing
stains” on page)

Preparing clothes for washing

• Drop items into washer loosely. Items

should move easily through wash water
for best cleaning and wrinkle-free results.

• Load washer properly and select correct

load size setting.

Overloading and selecting a setting too
small for the wash load can:
- cause poor cleaning
- increase wrinkling
- create excessive lint
- wear out items faster (because of

pilling)

• Mix large and small items in each load.

Load evenly to maintain washer balance. 
An off balance load can make the washer
vibrate during spin.

• Reduce wash time when using a small

load size setting. Loads with only a few
small items need less wash time.

• Use a large load size setting to reduce

wrinkling with permanent press clothes
and some synthetic knits. These items
should have more room to move in the
water than heavy items (towels, jeans)

Loading

• Separate heavily soiled items from, lightly soiled ones, even if they would normally be

washed together.

• Sperate dark colors from light colors, colorfast items from non-colorfast item.

Sorting

Summary of Contents for DWF-5510P


















Reviews: