4
DIRECTIONS FOR SAFE USE
HOW TO INSTALL
Location
Place your washer on a level and solid floor,
Considering the length of inlet hose, drain
hose and power supply cord.
Do not place or store your washer below 0˚C(32˚F) to avoid
any damage from freezing.
Do not place your washer where it may be splashed during
bathing.
Installation of the Under Base Cover(Option)
-DWF-5510P
After installing the washing machine,
assemble the under-base cover.
If washer is not level, it should be corrected by
the adjustable leg (provided optionally) in the
front-right side under the base and/or, a thin
block or brick.
NOTES:
The opening muse not be obstructed by carpeting
when the washing machine is installed on a
carpeted floor.
1
Before installing your washer, remove the
pad from the bottom of the cabinet. Then,
separate under cover from rear side of
cabinet by unscrewing and insert it into the
base.
2
Push the under-base cover into the end,
which decrease the noise made by this
washer.
SCREW
-DWF-6021P
1
After the packing box is opened, there is a
under-base cover at the top of the washer.
2
Push the under-base cover into the end,
which decrease the noise made by this
washer.