Daewoo DWD-1211RT, Service Manual

Page: 31 / 59

27
4. ERROR DISPLAY
ERROR
SINGAL
ERROR CAUSE COUNTERPLAN
①
inlet valve broken Change the Inlet-Valve
IE
WATER
②
drain motor working during water supply Change the Drain Motor
INLET ERROR
③
pressure switch disorderChange the Sensor Pressure
④
PCB can not check water level Change the PCB
①
drain motor out of order Change the Drain Motor
OE
DRAIN
②
inlet valve working during drain Change the Inlet-Valve
ERROR
③
pressure switch disorderChange the Sensor Pressure
④
PCB can not check water level Change the PCB
UE UNBALANCE ERROR
①
laundry unbalance rearrange the laundry
①
door opened during processing Clode the Door
LE
DOOR
②
LOCK S/W broken Change the LOCK SW
OPEN ERROR
③
PCB can not check door lockChange the PCB
①
continuous water supplyChange the Inlet-Valve
E2 Overflow
②
drain motor can not workChange the Drain Motor
③
pressure switch disorderChange the Sensor Pressure
E3
FAN MOTOR
①
fan motor cannot work Change the Fan-Motor
disorder ②
PCB cannot control fan motor The contact of the Connector or Change the PCB
E9
SENSOR PRESSURE
①
abnormal water level Change the Sensor Pressure
ERROR
① huge noise re-installation
E5
HIGH VOLTAGE
②
spining with jamming clothes between gasket rearrange the laundry
ERROR
③ PCB broken Change the PCB
①
huge noise re-installation
E6 EMG ERROR
②
spining with jamming clothes between gasket rearrange the laundry
③
motor broken Change the Motor
④
PCB broken Change the PCB
E7 Direction Error
①
move opposite direction
②
motor Hall IC broken check the connector and change
E8 motor disorder
①
connector problem The contact of the Connector
②
abnormal loading conditioncheck the loading condition and change
H1
sensor temp.
①
sensor temp broken Change the Sensor Temp.
dry disorder ②
connector problem The contact of the Connector
H2
sensor temp.
①
sensor temp. of washing broken Change the Sensor Temp.
wash disorder ②
connector problem The contact of the Connector
H3
overheating
①
fan motor cannot spin Change the Fan Motor
dry heater ②
sensor temp. of dry brokenChange the Sensor Temp.
H4
overheating
①
heater working with no water supply check water level
wash heater ②
sensor temp. of wash brokenChange the Sensor Temp.
H6 abnormal of washing heater
①
washing heater cannot workChange the Heater Wash
H7 abnormal of drying heater
①
dry heater cannot work Change the Heater Dry
H8
abnormal of sensor temp.
①
heater working with no water supply check the water level and washing heater
of washing