Daewoo DV-T6F4N-PQ, User Manual

Page: 13 / 22

17 DAEWOO Video Cassette Recorder User’s Guide
16 DAEWOO Video Cassette Recorder User’s Guide
Set Auto Repeat
A tape can be set to play the same segment over and
over in a repeating loop with the Set Auto Repeat
feature.Set Auto Repeat uses the VCR ’s memory
counter to determine the duration of the loop.
In the PREFERENCES menu,press the 7 button to
choose Set Auto Repeat .The Set Auto Repeat menu
will ask for a loop end time to be specified:
• The CLEAR button will erase all three numbers
entered and move the cursor back to the first
position (hours).
• The Press CLEAR to turn off message will appear
only after the first number has been entered into the
end time.
• Auto Repeat is set back to -:--by resetting the dialog
box,ejecting a tape, powering off the VCR,power
interruption,or by recording start. When a duration
time has been set:
• The VCR will automatically switch to rewind if the
counter meets or goes past the set Auto Repeat
duration.
• The VCR will automatically switch to playback
during rewind if the counter equals or is less than
0:00.
• The Auto Repeat may be adjusted by setting the
counter to 00:00.This can be done by pressing the
CLEAR button while the tape counter is on screen or
on the front panel display.
•The counter will not reset while rewinding in an
Auto Repeat loop.
AUTO REPEAT
Set the length of time
you want the tape to
play in a repeating loop
Loop from 0:00 to 2: - -
(h:mm)
Press CLEAR to turn off
Press MENU to exit
Using the Remote Control
Component Buttons
ON•OFF Turns off VCR when remote is set to control the VCR.
VCR Function Buttons
CHAN Up or Down Selects next higher or lower channel in the
VCR ’s channel memory.
CLEAR Resets time counter to 0:00:00.Allows you to change
entries when setting the clock or a timer recording.
F. ADV Lets you view one frame with each press of the button
when tape is in pause.
FORWARD Fast forwards the tape when the VCR is
stopped.Searches forward through a tape during playback.Starts
slow motion during play-pause and increases slow-motion speed.
GO BACK Switches between two channels.Select one channel and
then select another using the number buttons.Press GO BACK to
switch between the two channels.In menu mode,press to go back
to a previous menu.
INFO Shows the status displays on the TV screen.
INPUT Selects between the VCR ’s line input or tuner.Line input
refers to the signal coming from the component connected to the
AUDIO/VIDEO IN jacks on the back (L1)or front (L2)of the VCR.
MENU
Brings up VCR MAIN MENU on the TV screen.
SLOW Allows you to play slowly with sound off.
MENU
TV-VCR
POWER
-T
SPEED
F.ADV GO BACK
CHANNEL
CLEAR
SLOW SEARCH
REC
INFO INPUT
971P1R25GA0
Using On-Screen Menus,
c
ontinued