Daewoo DTR-400, User Manual

Page: 22 / 50

EN
22
4. PRESS
SKIP UP

I
BUTTON OR SKIP DOWN
I

BUTTON
TO SELECT DESIRED MODE
(USB OR SD) FOR ENCODING. THEN PRESS THE REC BUTTON AGAIN TO CONFIRM.
AND THE SYSTEM IS STARTING THE ENCODING MODE AFTER FEW SECONDSS.
5. IF ONLY USB DRIVE, SD OR MMC CARD IS INSERTED, STEP 4 CAN BE SKIPPED.
6. THE “REC” WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
7. TO FINISH ENCODING:
• PRESS
STOP
¡
BUTTON
OR
REC BUTTON
, “REC” WILL DISAPPEAR, RECORDING
AND CASSETTE PLAYER WILL STOP OPERATION. PRESS REC BUTTON AGAIN,
ENCODING AND CASSETTE PLAYER WILL RESUME TO WORK.
• PRESS AND HOLD REC BUTTON CONTINUOUSLY, “REC” WILL DISAPPEAR,
RECORDING WILL STOP OPERATION, BUT CASSETTE PLAYER WILL KEEP
OPERATION. PRESS REC BUTTON AGAIN, ENCODING WILL RESUME TO WORK.
8. TO HEAR NEWLY ENCODED TRACK:
• PRESS FUNCTION BUTTON TO SELECT USB OR SD MODE.
• PRESS SKIP UP

I
BUTTON OR SKIP DOWN
I

BUTTON TO SELECT THE NEWLY
ENCODED TRACK.
• THE NEWLY ENCODED TRACK IS ALWAYS STORED AS THE LAST TRACK IN USB/
SD.
• DURING PLAYBACK FROM USB OR SD, PRESS
REC BUTTON
TO SWITCH BETWEEN
TRACKS ENCODED BY THIS UNIT OR OTHER TRACKS STORED IN THE USB (OR SD)
ORIGINALLY.
REMARK:
- THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF THE
TAPE.
- THE RECORDING FORMAT IS PRESET AT – MP3 BIT RATE : 128 KBPS
AUX IN JACK & ENCODING
PRESS FUNCTION BUTTON TO SELECT “AUX” ON DISPLAY, THEN CONNECT THE
EXTERNAL AUDIO DEVICE (SUCH AS CD PLAYER) THROUGH THE AUX IN JAC K. AUDIO
SIGNAL FROM THE EXTERNAL AUDIO DEVICE CAN BE PLAYED THROUGH THE SYSTEM.
AUX IN ENCODING
1. PRESS
FUNCTION BUTTON
TO SELECT AUX MODE.
2. INSERT MEMORY DEVICE (USB DRIVE, SD OR MMC CARD).
3. PRESS THE
REC BUTTON
, THEN USB OR SD ICON WILL BE FLASHING.
4. PRESS
SKIP UP

I
BUTTON OR SKIP DOWN
I

BUTTON
TO SELECT DESIRED MODE
(USB OR SD) FOR ENCODING. THEN PRESS THE
REC BUTTON
AGAIN TO CONFIRM.
AND THE SYSTEM IS STARTING THE ENCODING MODE AFTER FEW SECONDSS.
5. IF ONLY USB DRIVE, SD OR MMC CARD IS INSERTED, STEP 4 CAN BE SKIPPED.
6. THE “REC” WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
7. TO FINISH ENCODING, PRESS STOP
¡
BUTTON OR REC BUTTON , “REC” WILL
DISAPPEAR.