EN
20
1. PRESS
FUNCTION BUTTON
TO SELECT “PHON” ON
DISPLAY.
2. SET THE
SPEED SELECTOR
TO THE PROPER POSITION
DEPENDING ON THE RECORD TO BE PLAYED.
3. PLACE THE RECORD ON THE PLATTER, USE THE 45
RPM ADAPTOR IF REQUIRED.
4. PUSH THE
LIFT LEVER
UPWARD TO RAISE THE TONE
ARM FROM THE ARM PARK, AND THEN SLOWLY MOVE
IT TO THE RECORD SIDE. THE PLATTER WILL START TO
ROTATE.
5. PUT DOWN THE
LIFT LEVER
TO DROP THE TONE ARM AND TOUCH THE RECORD
GENTLY. PHONO PLAYING STARTS NOW.
6. PUSH THE
LIFT LEVER
UPWARD TO RAISE THE TONE ARM FROM THE ARM PARK, NOW
PLATTER WILL STILL BE ROTATING BUT PHONO PLAYING WILL STOP. TO CONTINUE
THE PLAYING, THE USER NEEDS TO PUT DOWN THE
LIFT LEVER
.
7. ADJUST THE VOLUME TO THE DESIRED LEVEL.
8. AT THE END OF RECORD, THE PLATTER WILL AUTOMATICALLY STOP ROTATING. PUSH
THE
LIFT LEVER
UPWARD TO RAISE THE TONE ARM AND MOVE IT TO THE ARM PARK,
AND THEN PUT DOWN THE
LIFT LEVER
.
9. TO STOP MANUALLY, LIFT THE TONE ARM FROM THE RECORD AND RETURN IT TO THE
ARM PARK.
REMARK:
AS SOME KIND OF RECORD THE AUTO-STOP AREA WAS OUT OF THE UNIT
SETTING, SO IT WILL STOP BEFORE THE LAST TRACK FINISHES. IN THIS CASE, SELECT
THE
AUTO-STOP SWITCH
TO “ OFF “ POSITION, THEN IT WILL RUN TO THE END OF
THE RECORD BUT WILL NOT STOP AUTOMATICALLY (TURN OFF THE UNIT BY
POWER
BUTTON
OR SWITCH BACK THE
AUTO-STOP SWITCH
TO “ ON “ POSITION TO STOP THE
PLATTER ROTATE). THEN PUT BACK THE TONE ARM TO THE ARM PARK.
PHONO ENCODING
1. PRESS
FUNCTION BUTTON
TO SELECT “PHON” ON DISPLAY
2. INSERT MEMORY DEVICE (USB DRIVE, SD OR MMC CARD)
3. PRESS THE
REC BUTTON
, THEN USB OR SD ICON WILL BE FLASHING.
4. PRESS
SKIP UP
I
BUTTON OR SKIP DOWN
I
BUTTON
TO SELECT DESIRED MODE
(USB OR SD) FOR ENCODING. THEN PRESS THE
REC BUTTON
AGAIN TO CONFIRM.
AND THE SYSTEM IS STARTING THE ENCODING MODE AFTER FEW SECONDSS.
5. IF ONLY USB DRIVE, SD OR MMC CARD IS INSERTED, STEP 4 CAN BE SKIPPED.
6. THE “REC” WILL BE FLASHING ON THE DISPLAY DURNIG ENCODING.
7. TO FINISH ENCODING:
• PRESS
STOP
¡
BUTTON
OR
REC BUTTON
, “REC” WILL DISAPPEAR, RECORDING
AND TURNTABLE WILL STOP OPERATION. PRESS REC BUTTON AGAIN, ENCODING
AND TURNTABLE WILL RESUME TO WORK.
• PRESS AND HOLD
REC BUTTON
CONTINUOUSLY, “REC” WILL DISAPPEAR,
RECORDING WILL STOP OPERATION, BUT TURNTABLE WILL KEEP OPERATION.
PRESS
REC BUTTON
AGAIN, ENCODING WILL RESUME TO WORK.
