Changing the TV's Input
Normally, your TV displays the signal coming through the antenna terminal. However, if you’ve
connected another component to your TV(such as a VCR & DVD) using the Video/Audio input,
you will want to be able to view the signal from the component.
To do this, you will need to switch from the ‘ TV ’ input to the ‘AV1, AV2, CVI’ Input, as follows.
1
With the TV on, press the MENU button twice, then “ Set-Up ” menu will appear.
2
Use the
W
CH
V
buttons to select “ Input ”.
3
Press the
C
VOL
B
buttons to change the input source from ‘ TV ’ to ‘AV1, AV2, CVI’.
4
Wait 20 seconds, or press DISPLAY button or MENU button to return to normal TV viewing.
* CVI means the Component Video Input (Y/ PB/ PR) from the DVD player etc.
* Users can also select these input modes with the TV/AV button or the INPUT button on the
remote controller.
* On the AV1 mode , if you connect the S-VHS jack to your TV, "AV1" is changed to "S-VIDEO".
12
Chapter 3: Operating Your TV
Select
Set-Up
Language : English
Input :
AV1
Adjust
Next
3-1
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input :
TV
Adjust
Next
2
Select
Set-Up
Language : English
Input :
AV2
Adjust
Next
3-2
Select
Set-Up
Language : English
Input :
CVI
Adjust
Next
3-3
