background image

12

Channel skipping 

-  You can select skip „YES” or 

„NO” using the remote control 
RED „Skip” button (A11). 
A program with skip „YES” 
doesn’t appear on screen 
when changing channels with 
the PROGRAM UP (A6) / 
DOWN (A21) buttons.

Manual Channel Tuning

Choose a starting point

-  Select with „Program” the 

program from which you want 
to start manual tuning. Then the 
channel number, the frequency, 
the name and the program 
number of this program are 
displayed in the Install menu.

TV system modification

If necessary, you can modify the 
TV system : 
- Select „system” function. 
-  Adjust choosing between 

FRANCE (L/L’), GB (I), EURO 
(B/G), E/ EURO (D/K) systems. 

Then, the program displayed on 
the screen is changed to the 
chosen system.

Channel deleting

-  Select the program to delete using 

the remote control CURSOR UP 
(A6) / DOWN (A21) buttons. 

-  Press the remote control YELLOW 

„Delete” button (A26). The deleted 
program is moved to program 
number 99 with skip changed to 
„YES”. The existing 99 program is 
moved to program number 98 and 
so on.

Channel searching

- Select the „Frequency” function. 

-  Press, and hold for more than 1

second, the remote control 
CURSOR RIGHT (A20) [LEFT 
(A7)] buttons to start up [down] 
manual tuning. 

-  Searching will stop automatically at 

the next channel found (to stop 
tuning, press the remote control 
MENU button (A19)).

Note: 

  You can directly locate a 

program by entering the data 
into the „channel” or the 
„frequency” function.

Perform fine tuning

-  If you are unable to get a good 

picture or reasonable quality sound 
due to poor reception, it is possible 
to perform fine tuning. 

- Select the „frequency” function. 

-  Press, for less than 1 second, the 

remote control CURSOR 
RIGHT(A20) [LEFT(A7)] buttons to 
perform up [down] fine tuning in 
steps of 0.05MHz (50 kHz).

Channel order changing

-  Select the program to move using the 

remote control CURSOR UP (A6) / DOWN 
(A21) buttons. 

-  Press the remote control GREEN „Move” 

button (A12): the program line background 
is highlighted in green, and can be moved 
to another position using the remote control 
CURSOR UP (A6)/ DOWN (A21) buttons. 

-  When the desired position is reached, 

confirm the new position pressing the 
remote control GREEN „Confirm” button 
(A12). Then the program line background 
will return again to grey.

Enter station name

It is possible to enter your own choice of name 
for each program. You can change an existing 
name, or enter a name where none exists. If 
none exists „- - - - - - -” will be shown in the 
Install menu, and program status display ( see 
the section PROGRAM STATUS DISPLAY on 
page 8). 
- Select the „NAME” function. 
-  Select one of the 7 character positions by 

using the remote control CURSOR RIGHT 
(A20) / LEFT (A7) buttons to move the cursor. 

-  Then use the CURSOR UP (A6) /DOWN (A21) 

buttons to select the desired character for 
that position. 

-  Repeat the last two instructions for other 

positions, as desired. 

-  Once the name has been entered, press the 

OK button (A18) to store it. The name will be 
memorised to the program number currently 
shown on the „Store To” line. The „Store To” 
program number will highlight in red briefly.

Store program in memory

- Select the „store to” function 
-  Enter the program number you want to 

store to either by using the remote control 
CURSOR RIGHT (A20) / LEFT (A7) buttons, or 
directly by using the remote control NUMBER 
0...9 buttons (A3). 

- Press the OK button (A18) to confirm. 

Remarks:

  this function can also be used if you 

want to copy a program already 
memorised to another program 
number.

Summary of Contents for DTB-21S7

















Reviews: