Daewoo DSB-070L Service Manual Download

Page: 29 / 73

Description

1. After the power ON/OFF button is pressed once, the relay and triac are turned ON or OFF per the remote

control setpoint.
– TRIAC is controlled per the fan speed selection.
– RELAY is controlled per the operation mode selection.

2. If the power ON/OFF button is pressed once more, the relay and triac are turn off and the unit stops

operation.

3. The unit turns on or off according to the temperature setpoint by sensing the room air temperature through

thermistor.

4. If the fan speed selection is set to the auto position, the fan speed is automatically controlled according to the

temperature differance between room temperature and temperature setpoint.

5. If you press the ON/OFF button during operating the unit, Relay and LED is OFF and the unit is OFF.

Summary of Contents for DSB-070L










































































Search results

Summary of Contents for DSB-070L

Reviews:

Related manuals for DSB-070L

Brands by name

Popular brands

Daewoo DSB-070L, Service Manual

Search results

Summary of Contents for DSB-070L

Reviews:

Related manuals for DSB-070L

Brands by name

Popular brands