Daewoo DSA-095L, Service Manual

Page: 73 / 98

◆ DSA-245L, 245P
72
PROCEDURES PHOTOS
1.Stop the operation of the air conditioner and disconnect the wire from in
door unit to out door unit.
2. Disassemble the case. (Fig 1~2)
1
Remove the Top Panel.
2
Remove the Front Cabinet.
3
Remove the Side Cabinet and Back Cabinet.
3. Removing the Propeller Fan. (Fig 3)
1
Loosen the screw fixed at the motor bracket.
2
Remove the Plain Washer.
3
Remove the Propeller Fan.
4. Removing the panel control. (Fig 4)
1
Disconnect the wire at the control panel.
2
Loosen the screw at the panel control.
3
Remove the parts on the panel control.
5. Removing the vaccum pump.
6. Remove the partition panel. (Fig 5)
1
Loosen four screws at the bracket motor.
2
Disconnect the wire at the control panel.
7. Removing the Over load Protector. (Fig 6)
1
Remove the cocondenser
2
Loosen three volts at the compressor.
3
Remove the compressor.
Fig 1
Fig 2
Fig 3
Fig 5
Fig 4
Fig 6