Daewoo DSA-095L Service Manual Download

Page: 33 / 98

Description

1. After the power ON/OFF button is pressed once, the relay and triac are turned ON or OFF per the remote

control setpoint.
– TRIAC is controlled per the fan speed selection.
– RELAY is controlled per the operation mode selection.

2. If the power ON/OFF button is pressed once more, the relay and triac are turn off and the unit stops

operation.

3. The unit turns on or off according to the temperature set point by sensing the room air temperature through

thermistor.

4. If the fan speed selection is set to the auto position, the fan speed is automatically controlled according to the

temperature difference between room temperature and temperature set point.

5. If you press the ON/OFF button during operating the unit, Relay and LED is OFF and the unit is OFF.

Summary of Contents for DSA-095L



































































































Search results

Summary of Contents for DSA-095L

Reviews:

Related manuals for DSA-095L

Brands by name

Popular brands

Daewoo DSA-095L, Service Manual

Search results

Summary of Contents for DSA-095L

Reviews:

Related manuals for DSA-095L

Brands by name

Popular brands