24
TV Aspect Ratio
1
Use [ENTER] to select ‘TV Aspect‘ while the
‘Video‘ submenu is displayed.
2
Press [ENTER] or [
√
] to go to the second level.
3
Use [
… †
] to select the desired ‘TV Aspect’.
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the menu.
4:3 LB :
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars above
and below the picture. The default TV screen is set to
4:3 LB.
4:3 PS :
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen. Both
sides of the picture are cut off.
16:9 :
Select when a 16:9 wide screen TV is
connected.
Video Output
The default video output is set to 576i (interlaced scan
mode).
RGB :
Only if the DVD Re VCR is in RGB
interlace mode, you can watch RGB signal with
connecting the recorder to analog television using the
SCART jacks.
Interlace (576i) or Progressive (576p) :
If you
connect the DVD Re VCR to a digital
television (DTV) or Monitor using the COMPONENT
jacks, set Video Output to ‘576i’ or ‘576p’
(i : Interlaced
scan mode, p : Progressive scan mode)
.
Follow the same procedure as ‘TV Aspect’ to change
the ‘Video Output’.
1
Press [SETUP].
2
Use [
œ √
] to select ‘Preference‘.
3
While ‘Preference‘ is selected, press [
√
] to select
‘Video‘.
4
Press [ENTER]. The ‘Video‘ submenu is
displayed.
Preference > Video Setting
Setup menu
Preference
Confirm
Back
Exit
ENTER
MENU
SETUP
†
†
†
Video
Audio
Parental Control
Change Password
Auto Setting
VCR
Preference > Video
Confirm
Back
Exit
ENTER
MENU
SETUP
Preference > Video
Confirm
Back
Exit
ENTER
MENU
SETUP
†
†
†
TV Aspect
576i
Video Output
576p
√ RGB
†
†
†
†
†
TV Aspect
4:3 PS
Video Output
√ 4:3 LB
16:9
DF-H7BD2D-JB-I(GB) 2008.4.11 1:53 PM ˘
` 24 mac001 1200DPI 100LPI