16
Component Video Connection
• If your television is a high-definition or ‘digital
ready’ television, you may take advantage of the
DVD Re VCR’s Progressive Scan output
for the highest video resolution possible.
• If your TV does not accept the Progressive Scan
format, the picture will appear scrambled.
1
Connect the COMPONENT VIDEO OUT jacks on
the DVD Re VCR to the corresponding in
jacks on your TV using a Y Pb Pr cable (C) if the
component (Y, Pb, Pr) is available on your TV.
2
Connect the Left and Right AUDIO OUT jacks
from the DVD Re VCR to the left/right
audio in jacks on your TV using the audio cables.
Connections
•
Be sure to set the DVD Re VCR to
Progressive Scan mode by changing the
‘Video Output’ in the Setup Menu; see page
24.
•
Progressive Scan does not work with the RF,
Audio/Video or S-Video connections.
Scart Connection
1
Plug a scart cable into the scart socket EURO
AV1 at the back of the DVD Re VCR and
the corresponding scart socket at the back of the
TV set. (V)
2
Plug a scart cable into the blue scart socket
EURO AV2/DECODER at the back of the DVD
RVCR and the corresponding scart
socket at the back of a satellite decoder or set top
box.
Connecting a TV
Choose one of the following TV connections,
depending on the capabilities of your equipment.
RF Connection
Connect the RF OUT (TO TV) jack on the DVD
Re VCR to the antenna in jack on your TV
using the supplied 75-ohm RF cable (R).
This set doesn’t have a modulator output.
However it still applies the RF through
Output.
ANTENNA
INPUT
Y
Pb
Pr
COMPONENT/PROGRESSIVE VIDEO INPUT
S-VIDEO
INPUT
HDMI
R
V
C
Rear of DVD Re VCR
Rear of TV
DF-H7BD2D-JB-I(GB) 2008.4.11 1:53 PM ˘
` 16 mac001 1200DPI 100LPI