Utilities
49
4. Setting the Off time / Off time Setup
• Move to
Off Time
in the
Time
menu
• Select the Off time to “On” using the ”LEFT/RIGHT”
button.
6. Press the “SLEEP” button
• By pressing the “
SLEEP
” button on the remote controller repeatedly,
you can select one of the following settings:
Sleep Timer: Off => 30 => 60 => 90 => 120 => Off
• The set will turn off after the time you select.
• Move to
Off time setup
with the “UP/DOWN” buttons.
• To go to
Off time setup
, press the “LEFT/RIGHT” buttons.
• Place the cursor to
Clock
with “LEFT/RIGHT”t buttons.
• Set the
Clock
with the “UP/DOWN” buttons and then
press the
Menu
button to complete.
• Place the cursor to
Minute
with “LEFT/RIGHT” buttons.
• Set the
Minute
with the “UP/DOWN” buttons and then
press the
Menu
button to complete.
• Place the cursor to
AM/PM
with “LEFT/RIGHT” buttons.
• Set the
AM/PM
with the “UP/DOWN” buttons and then
press the
Menu
button to complete.
Note. :
• Information of Auto clock is required to DTV(DVB-T) signal.
• If an active signal is not present for about 30 minutes, the set will automatically turn to ST-BY mode.
5. Setting the Time zone / Daylignt saving
• Current time depends on the time zone and daylight
saving that you belongs to.
