44
You can record from an external component, such as a camcorder or VCR, connected to any of the DVD
RVCR’s external inputs.
1
Make sure the component you want to record from is connected properly to the DVD RVCR; see pages
11 and 14.
2
Use [
… †
] or [INPUT] to select the external input to record from.
3
Load a recordable disc or tape.
4
Set the desired Recording mode by pressing [REC MODE] repeatedly.
DVD: HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), SEP (Very
Low Quality - 8 hrs/disc)
VCR: SP (Standard Play), LP (Long Play - 2 times SP)
5
Press [REC (
●
)] once.
Recording will start. The REC indicator lights on the front panel display.
Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see ‘One Touch Record‘ on page 39.
6
Press [STOP (
■
)] to stop recording.
Recording from External Components
Note
If your source is copy-protected, you will not be able to record it using the DVD RVCR. See ‘Copyright Notice‘
on page 4 for more details.
Recording from an External Input
Recording from an External Input
You can record from a digital camcorder connected to the DV IN jack on the front panel of the DVD
RVCR.
You can use the DVD RVCR remote to control both the camcorder and the DVD RVCR. Before
recording, make sure the digital camcorder is properly connected to the front panel DV IN jack; see page 14.
1
Make sure your digital camcorder is connected to the front panel DV IN jack; see page 14.
2
Press [INPUT] repeatedly to select the DV input.
DV appears on the front panel display and the TV screen.
3
Find the place on the camcorder tape from which you want to start recording.
For best results, pause playback at the point you want to start recording. Depending on your camcorder, you
can use the DVD RVCR remote to control the camcorder using the STOP, PLAY, and PAUSE
functions.
4
Press [REC] once to start recording.
Recording is automatically stopped if the DVD RVCR detects no signal. You can pause or stop the
recording by pressing [PLAY/PAUSE] or [STOP]. You cannot control the camcorder from the remote control
during recording.
Recording from a Digital Camcorder
The source signal must be DVC SD format.
Some camcorders cannot be controlled using the DVD RVCR remote.
If you connect a second DVD recorder using a DV cable, you cannot control the second recorder from this one.
You cannot control the DVD RVCR remotely from a component connected to the DV IN jack.
You cannot record date and time information from a DV cassette.
DF-Q75D2D-HS-4(GB) 2006.6.2 10:7 AM ˘
` 44 mac001 1200DPI 90LPI
