27
VCR
O
per
ation
More Functions
Clock / counter display
Remaining time and cassette length
Searching a recorded program with index
Accessing counter zero position
■
The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The
counter does not count unrecorded parts of the tape.
■
If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).
Each time you press [DISPLAY] button,
1x: Time and date+current status
Time and date
2x: current status
counter
3x: disappear.
But if you press [CLK/CNT] button, clock and counter on display window will change
each other.
• If didn’t wind tape (PLAY, FF, REW,...), it doesn’t appear the tape remain time.
STOP SP PR01 ARD
14:00 08/06 E180 00:48
STEREO ON
When you want the player to show the time remaining from the current player tape position (to find out if there is
sufficient space for a recording, for example).
To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting this function
until you reach the correct length.
Call the player’s "SETUP", choose
"TAPE CONTROL"
• Remaining time display is only
possible when the cassette is
loaded.
TAPE CONTROL
TAPE REMAIN
E-240 01:27
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-
E-180
E-240
E-300
…
/
†
:SELECT
OK:CONFIRM SETUP:END
…
/
†
:SELECT
OK:CONFIRM SETUP:END
The player will wind to the position 0:00:00 and stop.
REW SP
GO TO ZERO
0:02:13
When you record a program, the VCR places an index mark at the start
of the recording.
To search fo an index mark
1. Call the player’s "SETUP", choose "TAPE CONTROL"
2. Choose index + to search forward or index - to search backward.
The VCR will locate your index mark and begin playback.
TAPE CONTROL
TAPE REMAIN
GO TO ZERO
COUNTER RESET
INDEX+
INDEX-
…
/
†
:SELECT
OK:CONFIRM SETUP:END