7
7. How to operate
Connecting the appliance
After installing the appliance, wait at least 1/2 hour before switching on the appliance.
During transportation the oil in the compressor may have flowed into the into the refrigeration
system.
The mains connection cable may be replaced by an electrician only.
The function of control panel
1. The figure on the temperature control 1~7 only means
the temperature level from high to low, not means the
specific temperature, turn the knob clockwise, the
temperature inside will go down, turn the knob to the
other direction, the temperature will go up.
3.The red light is compressor running light,the light-on
means compressor goes on working.
4.The green light is power light,the light-on means
the appliance is powered on.
2. Turn the knob to “REFRIGERATE” range, the temperature inside will be -0°C ~ +8°C, the refrigerating
function can be realized.In the “CHILL” range the temperature inside will be -9°C ~ -3°C.Turn it to
“FREEZE” range, the temperature inside will be -30°C ~-9°C, the freezing function can be realized.
Set dial to “FAST FREEZE”, the compressor may runs continuously and you can get a quick freezing.
NOTE :
Wait at least
5 minutes before restarting if you unplug the appliance.
Unit may fail to operate properly if restarted too quickly.
It will be used by appropriately adjusting the position according to food property.
How to defrost
Defrost the appliance when the frost accumulated on the evaporator is about 5mm(1/5inch) thick.
Power off the appliance. Remove foods. Keep drip tray in place. Defrosting usually takes a few
hours. To defrost quickly remove all foods from the appliance and leave door open.
Never use a knife or other metal instrument to remove ice/frost from the evaporator.
After defrosting empty water from drip tray, return the thermostat dial to the desired position to start
freezing again.
CH
ILL
FREEZE
REFRIGERATE
FAS
T F
RE
EZ
E
POWER RUNNING
1
2
3
4
5
6
7