6
EN
5. OPERATION
1.Before use, check that the tools in good working condition and that the length of the trimmer line
is correct, as follows:
2.Remove the cover of the line cutting blade.
3.Examine the general condition of the tool. Inspect the guard, switch, cordest and extension line.
Check for loose screws, misalignment, and binding of moving parts, improper mounting, broken
parts and any other condition that may affect its safe operation. If abnormal noise or vibration
occurs during operation, turn the line trimmer off immediately and have the problem corrected .Do
not use a damaged tool and attach a label“DO NOT USE”to the tool.
NOTE:
ADJUST THE TELESCOPIC TUBE TO PROPER LENGTH ACCORDING TO YOUR OPERATION
REQUESTS. THE TUBE CAN EXTEND AND SHORTEN WHEN YOU PRESS THE BUTTON BY PUS-
HING THE TUBE FORWARD AND BACKWARD.
WARNING! WHEN YOU ARE OPERATING:
1.Ensure that you are on a flat surface and have secure footing.
2.Check that the line touches or goes beyond the edge of the guard.
3.If the line is too short, pull on the nylon line and repeatedly press the spool button (9) until the line
reaches the edge of the guard. Pull the second line until it reaches the edge of the guard.
WARNING!
For your own safety when adjusting the length of the line, avoid coming into contact with
the line cutting blade which is fixed to the guard. It is extremely sharp. Keep your hands well away
from this area.
WARNING!
The tool runs for approximately 5 seconds after it has been switched off. Let the motor
come to a complete stand still before setting the tool down.
EXTENDING THE LINE
To extend the line press the spool onto the ground whilst the motor is turning and the line will extend
automatically. For most effective grass trimming, ensure the machine is operation at full speed and
then use slow shallow sweeps of the line, ensuring that you do not overload the machine by cutting
too fast or cutting through heavy terrain.
