EN
9
9.Charging batteries at a temperature below 10°C will cause chemical damage to the cell and may
cause a fire.
10.Do not use batteries which have heated during the charging process, as the battery cells may
have suffered dangerous damage.
11.Do not use batteries which have suffered curvature or deformation during the charging process
or which show other non-typical symptoms (gassing, hissing, cracking,…)
12.Never fully discharge the battery pack (recommended depth of discharge max. 80%) A complete
discharge of the battery pack will lead to premature ageing of the battery cells.
13.Never charge the batteries unsupervised.
3. LAYOUT AND ITEMS SUPPLIED
2.1 Layout (Fig. 1a/1b/4a)
1 Blade – moving
2 Blade – fixed
3 ON/OFF switch
4 Safety lock-off
5 Blade guard
6 Battery
7 Battery charger
8 Cord
9 the blade washer
10 the blade wave washer
11 the blade screw
12 the blade nut
2.2 Items supplied
• Open the packaging and take out the equipment with care.
• Remove the packaging material and any packaging and/or transportation braces (if available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for transport damage.
• If possible, please keep the packaging until the end of the guarantee period.
Important!
The equipment and packaging material are not toys. Do not let children play with plastic bags, foils
or small parts. There is a danger of swallowing or
suffocating!
• Original operating instructions
• Safety instructions
4. INTENDED USE
This machine is intended for domestic use in pruning branches and plants with a thickness up to 15
mm (hardwood) and 20 mm (softwood).
NOTICE: DO NOT CUT OTHER MATERIAL SUCH AS WIRE, STEEL WIRE, STONE, PLASTIC, AND SO
ON.
