![Daewoo DAGFS Series User Manual Download Page 6](http://html1.mh-extra.com/html/daewoo/dagfs-series/dagfs-series_user-manual_3258871006.webp)
5
CHEMICAL WARNING
• Ensure that the generating set room is properly
ventilated.
• Keep the room, the floor and the generating set clean.
When spills of fuel, oil, battery electrolyte or coolant occur,
they should be cleaned up immediately.
• Never store flammable liquids near the engine.
• Do not smoke or allow sparks, flames or other sources
of ignition around fuel or batteries. Fuel vapors are
explosive. Hydrogen gas generated by charging batteries
is also explosive.
• Never store flammable liquids near the engine.
• Do not smoke or allow sparks, flames or other sources
of ignition around fuel or batteries. Fuel vapors are explosive.
Hydrogen gas generated by charging batteries is also explosive.
ELECTRICAL WARNING
• The generating set should be shutdown with the battery
negative (‐) terminal disconnected prior to attempting to
connect or disconnect load connections.
• Do not attempt to connect or disconnect load connections
while standing in water or on wet or soggy ground.
• Make sure connect generator set to earth.
• Replace the generating set terminal box cover as soon as
connection or disconnection of the load cables is complete.
Do not operate the generating set without the cover securely in
place.
• Connect the generating set only to loads and/ or electrical
systems that are compatible with its electrical characteristics
and that are within its rated capacity
• Keep all electrical equipment clean and dry. Replace any
wiring where the insulation is cracked, cut, abraded or otherwise
degraded. Replace terminals that are worn, discolored or corroded.
Keep terminals clean and tight.
• Do not touch electrically energized parts of the generating
set and/or interconnecting cables or conductors with any
part of the body or with any non insulated conductive object.
Summary of Contents for DAGFS Series
