NOTE:
At the end of the
washing program, you can leave
the door of the machine ajar to
speed up the drying process.
NOTE:
If you open the door
of the machine or if power gets
cut during the washing cycle, the
program will resume once the door
has been closed or the power has
recovered.
Warning Sound Check (depends
on the model)
Follow the steps below to change
the volume of the warning sound:
1.
Press the On/Off key (1) to
turn on your machine. Press the
Option (6) and Confirm (7) keys
simultaneously for 3 seconds.
2.
When the sound setting is
detected, a long warning sound
will be heard and the machine will
show the last level set, which will be
between “S0” and “S3”.
3.
Press the Confirm key (7) to turn
the volume down. Press the Option
key (6) to turn the volume up.
4.
Switch off the machine to save
the volume selected.
“S0” means all sounds are off.
Factory default is “S3”.
Power Saving Mode
Follow the steps below to enable or
disable the power saving mode:
1.
Press the On/Off key (1) to
switch on your machine. Press the
Program (2) and Option (6) keys
simultaneously for 3 seconds.
2.
3 seconds later, the machine will
show the last setting, which is “IL1”
or “IL0”.
3.
“IL1” will be displayed when the
Power Saving Mode is enabled.
In this mode, the inner light (if
available) will turn off 2 minutes
after the door is opened and
the machine will switch off in 15
minutes if no key is pressed to save
power.
4.
“IL0” will be displayed when the
Power Saving Mode is disabled. If
the Power Saving Mode is disabled,
the inner light will remain on as
long as the door is open and the
machine will remain on unless it is
switched off by the user.
5.
Switch off the machine to save
the setting selected.
Power Saving Mode is enabled in
default factory settings.
Active Ion Technology (Depends
on the Model)
This function provides extra hygiene
thanks to the Ion Technology. It
works as an independent program.
To enable this function, press
the Option key (6) for 3 seconds
in ready state. After 3 seconds,
“Ion” message will be displayed
to indicate that the Active Ion
Technology function has been
enabled. Release the key once
the “Ion” is displayed. The Active
Ion Technology function will be
cancelled automatically in 24 hours
unless the user intervenes.
NOTE:
The Active Ion
Technology function will be
cancelled if the machine is switched
off.
NOTE:
The Active Ion
Technology function does not run
together with any program.
NOTE:
If the Active Ion
Technology function is enabled,
the Active Ion Technology warning
LEDs will flash when the door is
opened.
Crystalight (Model Depending)
This technology which have Ion and
Light Technology together, provides
to extra hygiene. It prevents bad
EN - 2
4
