6
Cyclone Lyte 600W Corded Vacuum Cleaner
FLR00039
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
1.
Once the dust level reaches the ‘MAX’
mark on the
Dust compartment
(4) it
will need emptying and the filters
cleaned.
2.
To empty the cleaner, hold the
Dust
Compartment
(4) over a dust bin and
press the
Dust Release Catch
(3) and
the base of the dust compartment will
swing open and allow the collected
dust to fall out into the dust bin.
3.
Hold the
Filter Compartment
(8) and
press the
Filter Compartment Release
Catch
(7) and remove the Filter
Compartment.
4.
Twist the top off the
Filter
Compartment
(8) anticlockwise and
remove.
5.
Pull out the filter assemblies.
6.
Wash the Micro, Sponge and cyclonic
filters in warm running water until the
water runs clear. Allow the filters to
dry thoroughly for 24 hours before
reuse.
Using Your Corded Stick Vacuum Cleaner
Emptying and Cleaning Your Corded Stick Vacuum Cleaner
WARNING
Always disconnect the cleaner from the mains power supply before cleaning.
WARNING
do not continue to use your vacuum cleaner once the ‘MAX’ mark has been
reached as permanent damage may occur to the appliance.
1.
Once you have assembled
your vacuum cleaner as
desired above, Insert the
mains plug into the nearest
socket.
2. To operate the vacuum cleaner,
grip the vacuum by the Handle
(5) and press the On/Off Trigger
Switch (6) at the top of the
handle
–
arrowed right.
1
2
3
1
2
