5
Cyclone Digi Flex Cordless Vacuum
FLR00041
User Manual
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Before the first time you use your Cordless Vacuum Cleaner
Please read these operating instructions thoroughly and keep them in a safe place for future
reference.
Remove all packing materials and discard responsibly.
Charging the internal Battery
Before use, please ensure that the internal rechargeable battery is fully charged as follows
:
1.
Insert the
Small Power Plug
(18) of the
Mains Charger
(19) into the
Charging Socket
(11).
2.
Plug the
Mains Charger
(19) into the nearest mains socket.
3.
The
Battery Indicator
(30) will flash green and the
Battery Charge Display
(26) will count
up to 100% as the internal battery charges.
4.
Once the battery is fully charged (after approximately 5 hours), the
Battery Charge Display
(26) will display 100 (arrowed below) showing that the internal battery is 100% fully
charged and the
Mains Charger
(19) can now be removed.
Attaching the Accessories
CAUTION
Ensure that the vacuum cleaner is not connected to the mains charger before use.
The Floor Attachment
1.
Push the
Aluminium Flexi Tube
(21) onto the
Air Intake
(13) until it clicks home as shown
below:
2.
Push the
Motorised
Floor Tool
(16) onto the other end of the
Aluminium Flexi Tube
(21)
again until it clicks home.
NB
The internal battery will need
recharging when the
Battery
Indicator
(30) flashes red and the
Battery Charge Display
(26) reads a
low value (less than 10%). Follow
the above procedure (1
–
4) to
recharge the internal battery.
